Sign In | Join Free | My benadorassociates.com
China Guang Zhou Sunland New Energy Technology Co., Ltd. logo
Guang Zhou Sunland New Energy Technology Co., Ltd.
Guang Zhou Sunland New Energy Technology Co., Ltd. Your Personal Battery Expert! sales@tacbattery.com Mobile : 15813319221
Verified Supplier

13 Years

Home > Polymer Lithium Ion Batteries >

IEC Standard Polymer Lithium Ion Batteries For Tablet PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C

Guang Zhou Sunland New Energy Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

IEC Standard Polymer Lithium Ion Batteries For Tablet PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C

  • 1
  • 2

Brand Name : TAC BATTERY

Model Number : 1.6 AH 3.7V

Certification : ROHS \ CE\UL

Place of Origin : guangzhou

MOQ : 500pcs

Price : USD 25

Supply Ability : 100000 per month

Delivery Time : 20-30 days for pack

Packaging Details : 20 pack in one plastic tray, 10 tray in each carton

material : LIPO

voltage : 3.7v

capacity for pack : 1.6ah

capacity for cell : 4ah

accemble : 4s

connector : 5 pin molex 51146. //// Cable 150mm length

circle life : 500 times

warranty : 1 year

size : less than 200mm x 110mm x. 80mm

Cell size : t*w*h= 8*50*110mm

Contact Now

Lithium Polymer Battery For Table PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C

Base Data for Lithium Polymer Battery For Table PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C

data for pack test standard
1.6ah normal capacity
1.5ah Minum capacity
3.7v nomral voltage
4.2±0.03V 100% full charge voltage
0.5c charge current
0.5c dishcharge current
5 pin molex 51146. connector for pack
peak current 2A for single cell
continue current 1.5A for single cell

Specification for Battery pack

charge method with IEC standard

at first charger the battery with Constant Current 0.5C5A

and charger with Constant Voltage 4.2V

0.01 C5A cut-off

Charge time : 4.0h

discharge method with IEC standard

discharge the battery with

Constant current 0.2 C5A and test the

end voltage 3.0V

with IEC standard

Fast charge method with IEC standard

Constant Current 1C5A

Constant Voltage 4.2V

0.01 C5A cut-off

Charge time 2.5h

Performance Test For Cell

Item

Test Method

Requirements

Open-Voltage

standard charge the battery

measured within 24 hours

and record the data

≥4.08V

Internal impedance

measured by AC 1KHz after 50% charge.

then record Internal resistance

≤80mΩ

Minimal Rated

Capacity

The capacity on 0.2C5A discharge till the voltage tapered to 3.0V

Measured after rested for 30min then finish standard charge

then record the data

Discharge Capacity

≥4000mAh

Safety Test with UN38.3 Standard for Lithium Polymer Battery For Table PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C

1 / Short Circuit Test (20±2℃ ) process and result

  1. sort fresh battery samples 100% fully charged each test sample battery, in turn,
  2. the battery should be is short-circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.
  3. At room temperature(20±2℃ ).
  4. Test result: No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃

2 / Vibration Test process and result

  1. Standard charging the samples
  2. Fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz an 55Hz,
  3. the excursion of the vibration is 1.6mm.
  4. The cell shall be vibrated for 30 minutes per axis of XYZ axes.
  5. Test result: No explosion,No fire

3 / Crush Test process and result

  1. sort fresh battery samples 100% fully charged
  2. Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min.
  3. Test result: No explosion,No fire

4 / Drop Test process and result

The samples should be dropped from a height of 1 meter twice onto concrete ground.

Test result: No explosion,No fire

5 / Short Circuit(60±2℃ ) test process and result

sort fresh battery samples 100% fully charged each test sample battery, in turn,

  1. the battery should be is short-circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.
  2. At room temperature(60±2℃ ).
  3. Test result: No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃

6 / Impact test process and result

  1. A 56mm diameter bar is inlayed into the bottom of a 10kg weight.
  2. And the weight is to be dropped from a height of 1m onto a sample battery
  3. then the bar will be across the center of the sample.
  4. Test result:No explosion, No fire

7 / Forced Discharge test process and result

  1. sort fresh battery samples 100% fully charged
  2. Discharge the samples at a current of 1 C5A for 2.5h.
  3. Test result:No explosion, No fire

8 / Nail Pricking test process and result

  1. sort fresh battery samples 100% fully charged
  2. Prick through the sample battery with a nail having a diameter of 3mm and remain 2h.
  3. Test result : No explosion, No fire

Drawing for 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

IEC Standard Polymer Lithium Ion Batteries For Tablet PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C

T:

Max.08.0

Weigh

200.5+0.5 –0.5

H

110+0.5 –0.5

UNIT

mm

Similar Product Photos

IEC Standard Polymer Lithium Ion Batteries For Tablet PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C


Product Tags:

lithium ion polymer batteries

      

high capacity lithium ion battery

      
Quality IEC Standard Polymer Lithium Ion Batteries For Tablet PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C for sale

IEC Standard Polymer Lithium Ion Batteries For Tablet PC 1.6ah 3,7V 0850110 Charge And Discharge 0.5C Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Guang Zhou Sunland New Energy Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)